1 catalog ds11-tbd dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 issued 1-04 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 ?2004 by tyco electronics corporation. all rights reserved. cii and tyco are trademarks. ds11 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc product facts standard options: short circuit/overload protection, switch status and trip status. optically coupled all solid state relay. ttl & cmos compatible input. low on-resistance power mosfet output. tested per mil-r-28750 and approved to dscc drawing 88062 with ??level screening. ds11 series ssrs feature state of the art photo-voltaic optical isolation and power mosfet output chips for ultra-reliable high speed switching of dc loads up to 2 amps, with extremely low on-resistance. standard options include integral current overload/short circuit protection to provide protection of the relay, load and wiring; and isolated switch status or trip status. the overload feature provides protection if a short or overload develops while the relay is in the on state or if the relay is turned on into a dead short. switch status, optically isolated from the load, signals the status of the output and provides a logic ??when the output is off and a logic ??when the output is on. trip status, also optically isolated from the load, provides a logic ??if the output trips off and a logic ??when the output is in a normal condition, on or off, and is available only in conjunction with short circuit protection. cii part no. dscc dwg. no. relay version ds11-1y 88062-008 basic relay ds11-1000 88062-004 relay w/ short circuit protection ds11-1001 88062-006 relay w/ switch status DS11-1002 88062-002 relay w/ short circuit protection and switch status ds11-1003 n/a relay w/ short circuit protection and trip status 2 terminal input configuration direct drive (status optional) ttl drive 3 terminal input configuration with output status without output status +v supply load v cc input output ttl 1 3 6 8 12 14 status output +v load supply load v status v cc input output 1 3 6 8 12 14 ttl or cmos +v supply load v cc input output ttl or cmos 1 3 6 8 12 14 status output +v load supply load v status v cc input output 1 3 6 8 12 14
2 ds11 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc (continued) electrical specifications (-55? to +105? unless otherwise specified) input (2 terminal configuration) input supply voltage range (vcc) 3.8 - 32 vdc (notes 1 & 2, figures 1 & 2) input current (max.) @ 5vdc 15madc (notes 1 & 2, figures 1 & 2) must turn-on voltage 3.8vdc must turn-off voltage 1.5vdc reverse voltage protection -32vdc input (3 terminal configuration) control voltage range 0 - 18 vd control current (max.) 250?dc @ 5v, 1ma @ 18v input supply voltage range (vcc) 3.8 - 32 vdc (notes 1 & 2, figures 1 & 2) input current (max.) @ 5vdc 15madc (notes 1 & 2, figures 1 & 2) must turn-on voltage 0.3vdc must turn-off voltage 3.2vdc i/o dielectric strength (min.) 1,000v rms insulation resistance (min.) @ 500vdc 10 9 ohms capacitance (max.) 10pf output continuous load current (max.) @ 25? 2.1adc (figure 7) continuous load voltage (max.) 60vdc transient blocking voltage (max.) 80vdc (note 5) on resistance (max.) @ t j = 25?, i l = 100ma 0.15 ohm (note 6, figure 6) output voltage drop (max.) 0.5vdc leakage current (max.) @ v = 60vdc 100?dc leakage current (max.) @ v = 60vdc, with switch status 2madc turn-on time (max.) 3 ms (figure 3) turn-off time (max.) 1 ms (figure 3) dv/dt (min.) 100v / ? electrical system spike 600vdc (note 5) output chip junction temperature (max.) 125? thermal resistance (max.), junction to ambient 90?/w thermal resistance (max.), junction to case 25?/w status status supply voltage range 1 - 18vdc status current (max.) @ vstatus 0.4vdc 600?dc (figure 5, note 8) status leakage current (max.) @ 16vdc 10?dc status turn-on time (max.) 3.5 ms (figure 4) status turn-off time (max.) 8 ms (figure 4) short circuit protection current surge without tripping (max.), 100ms pulse 4.25adc overload trip current (max.), 0.5 ms pulse, v = 60vdc 10adc trip time (typical), turning on into short 400? trip time (typical), shorting while relay is on 280? environmental characteristics ambient temperature range: operating: -55? to +105?. storage: -55? to +105?. vibration resistance: 100 g?, 10-3,000 hz. shock resistance: 50 g?, 11 ms pulse. constant acceleration resistance (y1 axis): 5,000 g?. catalog ds11-tbd dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 issued 1-04 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 mechanical characteristics weight (approx.): .176 oz. (5 grams) materials: header: kovar cover: nickel pins: kovar, gold plated
3 figure 1 - maximum input current vs. input voltage figure 2 - series resistance vs. vcc supply voltage (note 1) ds11 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc (continued) catalog ds11-tbd dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 issued 1-04 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 figure 5 - status resistor vs. status supply voltage figure 6 - on-resistance vs. temperature (note 6) figure 3 - turn-on and turn-off timing figure 4 - output status timing input voltage, vcc (vdc) input current (ma) 18 15 12 9 6 3 0 0 51015 20 25 30 40 50 60 vcc (volts) r series (ohms) 300 600 900 1200 1500 1800 0 0 6 10 15 20 25 30 35 status supply voltage (volts) status resistor (ohms) 35000 30000 25000 20000 15000 10000 5000 0 0 5 10 15 20 junction temperature ( c) normalized on resistance factor (nr) 0.0 25 50 75 100 125 0.2 0.4 0.6 0.8 1.2 1.0 1.4 1.6 1.8 2.0 pin 14 (input) pin 6-8 high low off on t t on off 90% 10% t t v v control s 50% 90% 10% status turn-off time status turn-on time off on
4 ds11-tbd?df?rg?-04 ds11 series high performance solid state relays dc solid state relay for loads up to 2a @ 60vdc (continued) dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-3611-1514 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-5-729-0425 uk: 44-141-810-8967 notes 1.2 terminal input configuration is compatible with cmos or open collector ttl (with pull-up resistor). for vcc levels above 6v dc, a series limiting resistor is required. see fig. 2 for resistor value. use standard resistor value equal to or less than value from the curve. 2.input transitions to be 1ms duration, and input direct drive should be ?ounceless contact?type. 3. vcc = 5vdc for all tests unless otherwise specified. 4.all ds11 series relays may drive loads connected to either positive or negative referenced power supply lines. reversing pola rity of output may cause permanent damage. inductive loads must be diode suppressed. 5.transient blocking voltage and electrical system spike tests are performed per mil-std-704 (28vdc systems). 6.to determine the maximum on-resistance at any given junction temperature, multiply on-resistance at 25? (0.15 ohm) by norma lized on-resistance factor from curve (fig. 6). 7.overload testing per mil-r-28750 is constrained to the limits imposed by the short circuit protection requirements of this sp ecification and dscc drawing 88062. load circuit series inductance for ?oad shorted?mode of operation to be limited to 50mh max. maximum repetition rate into a s horted load should not exceed 10 hz. 8.proper operation of the status feedback requires a status pull-up resistor. see fig. 5 for status resistor value. figure 7 - temperature derating curve figure 9 - outline dimensions figure 8 - maximum surge current without tripping ambient temperature ( c) output current (amps) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -50 -40 -20 0 20 40 60 80 100 120 .140 (3.55) .500 (12.70) .600 (15.24) .300 (7.62) .110 (2.79) .530 max (13.46) .850 ref. (21.59) .273 .020 (6.93 .50) .020 max. (.50) .190 max. (4.82) .200 (5.08) .890 max. (22.60) .490 ref. (12.44) .017 +.002, ?001 dia. (.43 + .05, ?02) 6 pls. date code here top marking orient as shown tolerance: 0.010 (0.25mm) for 2 place decimals, 0.005 (0.13mm) for 3 place decimals. unless otherwise specified time (seconds) surge current (amps) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0.01 0.1 1 10 +85 c +25 c -55 c
|
